NEW ! The Stack Registers Display :
                                           ┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈┈





The stack display is another companion which displays in real time all stack movements whenever a change occurs on registers X, Y, Z, T and L. The display adjusts to the calculator modes (FIX, SCI, ENG) and performs rounding same way as on the real calculator. Numbers can be pasted into both displays from other applications, as well as copied with a mouse click and later be used in other applications.

Here is how :









































Note:

The Alpha register can also be copied to another applications.

Numbers pasted onto the calculator’s main display will always push the stack up one level, same as when entering a number on the calculator’s keyboard followed by ENTER key.

Numbers pasted onto the stack display at the X level, or any other level, will not push the stack up, same as when entering a number on the calculator’s keyboard followed by ON ON.

Numbers with exponents (or larger than 9’999’999’999) can be entered with “E” as exponent separator or only with “+” / “-” as separators. Ex:  12345.23E+34 or 12345.23+34 is identical. The stack display will by default not show the “E”, this can be changed via the RAM Layout Manager.

Number can be pasted as hexadecimal values if prefixed with “0x”

RAM_Layout_Manager.htmlshapeimage_1_link_0
 FAQ’s../Main/FAQs.html
 Download../Main/Downloads.html
 Home../Main/HP-41CX_Emulator.html

The stack display, double click on any number to copy it into the pasteboard. A dot will appear in front of the register label, to indicate that it has been copied

Single click in this area at the number level to paste the content of the pasteboard into this stack level

The main display, double click on the number to copy it into the pasteboard

This “dot“ appears once the number has been copied into the paste board

click to open or close the stack display

Double click on this area at the number level to clear this stack level

Single click in this area to paste the content of the pasteboard into register X. This pushes the stack up one level as when entering a number followed by ENTER

 
 
 
 
 

© LaurentSpohr Software, All Rights Reserved • E-Mail: laurent.spohr@gmail.com

This Website is best viewed with Safari 3